How to Prepare Your Irrigation System for Summer
Whether for your residential, commercial, or agricultural use, irrigation is a vital component of your water utilization. Your home and business simply cannot thrive without a reliable and fully functioning irrigation system. Running outside to switch the position of a single sprinkler simply will not deliver the results you want!
A properly designed, installed, and maintained irrigation system will keep your landscaping healthy during the warm summer months in Washington. By completing the preparation listed below, you will ensure that your irrigation system is working flawlessly by the time June arrives with its hot weather.
First, Run a Test to Check Sprinkler Heads
It is important to test for possible problems before summer arrives. Start with a test cycle of your sprinklers. This will help you find any broken sprinkler heads. If your sprinklers are less than ten years old, you can simply select an option for a “test” that automatically runs each zone of your irrigation system, one at a time. As each zone runs, you will have the opportunity to walk around your property and uncover the areas where water flow isn’t as controlled as it should be.
Identify and Fix the Water Flow Problem
There are many potential causes of improper water flow. One of the most common culprits is a lawn mower breaking a sprinkler head. You’ll know the sprinkler head needs to be replaced if water shoots out like a geyser, instead of in the normal controlled manner.
It’s also possible that a sprinkler head is simply clogged with dirt, mulch, or minerals from hard water. The most obvious sign of this problem is decreased water flow, and you can solve it by cleaning the sprinkler spray head from the inside. If the sprinkler head isn’t visibly broken or clogged, its rubber seal might be so worn down that a leak has formed. At the point that the leaking water flows down in a river, you need to replace the sprinkler head.
Inspect Your Grass
It’s fairly simple to spot symptoms of a malfunctioning irrigation system by looking at your grass. Is one specific area of grass brown while the rest is green? A sprinkler head might need to be replaced in order to help water reach that dying area. On the other hand, if certain areas of your lawn look too much like swampland, you likely have a serious leak to resolve or your irrigation system needs to be reprogrammed to water less often.
It’s always important to stay aware of the condition of your irrigation system, but if you would rather trust irrigation experts with this task, all you need to do is contact a trusted Washington company like Aquatech Well Drilling & Pumps in Sedro-Woolley. Call Aquatech today at 360-474-1322 for professional help making the most out of your irrigation system.